Laser Friend
Units 14 & 15
Station Lane Ind. Estate
Old Whittington
Chesterfield
Derbyshire
S41 9QX
Tel: 01246 266010
Fax: 01246 266011
Paper Specifications for Laser Printers
| Category | Specification |
| Acid Content | 5.5pH to 8.0pH |
| LJ5, 6L front input slot | 60 to 163 g/m2 |
| LJ6P Tray 1 | 16 to 43lbs |
| LJ5P paper cassette | |
| LJ6L/6L paper out bin | 60 to 105 g/m2 |
| LJ5 Tray 2 | 16 to 28lbs |
| LJ5Si Trays 2,3,4 | |
| LJ6P Tray 2 | |
| LJ5Si Tray 1 | 60 to 199 g/m2 |
| 16 to 63 lbs | |
| LJ5 Tray 1 | 60 to 135 g/m2 |
| 16 to 36 lbs | |
| LJ5 Tray 3 | 60 to 90 g/m2 |
| 16 to 24 lbs | |
| LJ4V/4MV all paper sorces | 64 to 105 g/m2 |
| 17 to 28 lbs | |
| LJII/LJIII | |
| LJIID/LJIID upper Tray | 60 to 135 g/m2 |
| LJ4/LJ4+ MP Tray | 16 to 36 lbs |
| LJ4L/4P manual feed slot | |
| LJIIP/LJIIIP/LJIIP+ | |
| IIISi/LJ4Si simplex | 60 to 105 g/m2 |
| LJ4/LJ4+/PC Tray | 16 to 28 lbs |
| LJ4L/LJ4P paper cassette | |
| LJIID/LJIID lower Tray | |
| LJIID/LJIIID/LJ4+ duplex | 60 to 90 g/m2 |
| LJIIISi/LJ4Si duplex | 16 to 24 lbs |
| LJ4/LJ4+ LCTray | |
| Caliper | 3.0 to 7.0 mils |
| 0.094 to 0.18mm | |
| Curl in ream | Flat within5mm (0.2in) |
| Cut edge conditions | Cut with sharp blades |
| with no visible fray | |
| Fusing compatibility | Must not scorch, melt, offset |
| or release hazardous emissions | |
| when heated to 200 degrees C | |
| (392 degrees F) for 0.1 second | |
| Grain | Long grain |
| Moisture content | 4% to 6% by weight |
| Smoothness | 100-250 Sheffield |